Fronius TransPocket 2500 Instructions De Service page 51

Masquer les pouces Voir aussi pour TransPocket 2500:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Preventive and
corrective main-
tenance
(continued)
Safety inspection
Disposal
Safety markings
Data security
When ordering spare parts, please state the exact designation and the
relevant part number, as given in the spare parts list. Please also quote the
serial number of your machine.
The owner/operator is obliged to have a safety inspection performed on the
machine at least once every 12 months.
The manufacturer also recommend the same (12-month) interval for regular
calibration of power sources.
A safety inspection, by a trained and certified electrician, is prescribed:
-
after any alterations
-
after any modifications or installations of additional components
-
following repairs, care and maintenance
-
at least every twelve months.
Observe the relevant national and international standards and directives in
connection with the safety inspection.
More detailed information on safety inspections and calibration is available
from your regional or national service centre, who will be pleased to provide
you with copies of the necessary documents upon request.
Do not dispose of this device with normal domestic waste!
To comply with the European Directive 2002/96/EC on Waste Electrical and
Electronic Equipment and its implementation as national law, electrical
equipment that has reached the end of its life must be collected separately
and returned to an approved recycling facility Any device that you no longer
require must be returned to our agent, or find out about the approved collec-
tion and recycling facilities in your area.
Ignoring this European Directive may have potentially adverse affects on the
environment and your health!
Equipment with CE-markings fulfils the basic requirements of the Low-
Voltage and Electromagnetic Compatibility Guideline (e.g. relevant product
standards according to EN 60 974). .
Equipment marked with the CSA-Test Mark fulfils the requirements made in
the relevant standards for Canada and the USA.
The user is responsible for the data security of changes made to factory
settings. The manufacturer is not liable, if personal settings are deleted.
XI
ud_fr_st_sv_00467
012005

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Transpocket 2500 tig

Table des Matières