Doughnut Plates - gourmetmaxx SW 072B Vario Chef 6in1 Mode D'emploi

6. When closing the appliance, ensure that the locking catch clicks fully into place. When
cooking, the green control light may switch off and on. If the green light comes on, it
means that the appliance is re-heating in order to maintain a constant temperature.
7. After approximately 5–6 minutes, you can open the appliance to check whether the
omelette is ready for you, or needs to be cooked for longer.
8. Remove your omelette with a wooden or plastic kitchen utensil to avoid damaging
the coating.
9. If you do not want to make any more dishes, remove the plug from the socket and
leave the appliance to cool down completely before removing the plates, cleaning
them and storing them with the appliance.

Doughnut plates

Inserting these plates allows you to make delicious doughnuts.
1. Insert the doughnut plates as shown in the 'Inserting and exchanging plates' chapter.
2. The appliance must be connected only to properly installed mains sockets. The red
control light illuminates as soon as the appliance is connected to a mains socket.
3. The appliance now needs to pre-heat. Keep the appliance closed while it is heating
up. The appliance takes around 3–5 minutes to pre-heat, and is ready when the
green control light illuminates.
4. When the green power LED illuminates and the pre-heating process has ended,
release the latch and open the device.
5. Now pour your doughnut mix into the hollows in the bottom doughnut plate and close
the appliance. Make sure that you do not overfi ll the doughnat plates to prevent
leakage.
6. When closing the appliance, ensure that the locking catch clicks fully into place. When
cooking, the green control light may switch off and on. If the green light comes on, it
means that the appliance is re-heating in order to maintain a constant temperature.
7. After approximately 5–6 minutes, you can open the appliance to check whether the
doughnuts are ready for you, or need to be cooked for longer.
8. Remove your doughnuts with a wooden or plastic kitchen utensil to avoid damaging
the coating.
9. If you do not want to make any more dishes, remove the plug from the socket and
leave the appliance to cool down completely before removing the plates, cleaning
them and storing them with the appliance.
48