Migatronic SIGMA ONE 300 COMPACT Guide De L'utilisateur page 15

Connection and start-up
Lift instructions
The lifting points must be used (please see figure) when lifting
the machine. The machine must not be lifted with mounted gas
bottle.
Do not lift the machine by the handle.
Do not step on the handle.
Adjustment of wire brake
The wire brake must be adjusted so as to stop the wire reel before
the welding wire runs over the edge of the reel. The brake force
depends on the weight of the wire reel and the wire feed speed.
Factory setting is 15kg.
Adjustment:
• Dismount the control knob
by placing a thin screw driver
behind the knob and then pull
it out.
• Adjust the wire brake by
fastening or loosening the self-
locking nut on the axle of the
wire hub.
• Remount the control knob.
Wire inching
07:07
Wire feeder
Program
Process setup
Wire feeder
Machine setup
0.5-30 m/min
MCU ventilation
Power source
blue pos. 5a
click
air
MWF lock-turn function
15
Wire feed unit
blue (pos. 5a)
1
2
click
air
1
2