Table des Matières
Publicité
E. Attaching Extractor Housing And Left Side Perimeter Bracket
3
4
The 8 x 15 Ft model is shown.
Install squaring
bracket beneath top
of perimeter bracket.
7
1
1
6
5
4
8
2
.
See Section 4-3B for installation
hardware torque values.
1
Extractor Housing
2
Right Side Perimeter Brackets
Use 5/16 x 3/4 in. screws and nuts to at-
tach extractor housing to right side peri-
meter brackets.
3
Left Side Perimeter Brackets
4
End Perimeter Brackets
5
Corner
Use 5/16 x 3/4 in. screws and nuts to at-
tach extractor housing to left side peri-
meter bracket.
6
Left Post Support Bracket
7
Right Post Support Bracket
Use 1/4 x 3/4 in. screws and nuts to at-
tach two corner brackets, one left post
support bracket, and one right post sup-
port bracket to end perimeter brackets.
8
Squaring Bracket
.
Before installing squaring bracket,
be sure perimeter is square by
measuring the distance between di-
agonally opposite corners. The peri-
meter is square if the two measured
distances are equal.
Use 1/4 x 3/4 in. button-head low-profile
screws and nuts to attach a squaring
bracket at each corner of the perimeter
assembly.
301048007-4
OM-261 093 Page 18
Publicité
Table des Matières
