Maintenance; Accessories - Truma MonoControl CS Mode D'emploi

Maintenance

The MonoControl CS gas pressure regulation system is
maintenance-free.
In Germany, the gas system must be retested every 2 years by
a liquid gas specialist (DVFG, TÜV, DEKRA). The test must be
confirmed on the respective test certificate (G 607).
In countries where testing is not mandatory, we recommend
that the gas system is tested every 2 years for your own
safety.
The filter cartridge in the gas filter must be checked for resi-
due (e.g. oil or clear liquids) at regular intervals, but at least
every time the cylinder is changed (see the gas filter operating
instructions).

Accessories

High-pressure hoses
(with hose rupture protection) see Page 72
1.5-metre connection hose
for the connection of external gas cylinders – connection G.5
for Germany – (part no. 50020-61300)
Replacement seal
for high-pressure connection, M20 x 1.5 (G. 13); (part no.
50020-76300)
EisEx, regulator heating
(part no. 53101-01)
Elbow union 90°
(part no. 50020-56000)
16
Additional kit
required when gas cylinders are more than 100 cm apart (part
no. 50020-61100)
Gas remote switch
for turning off the gas supply from inside the vehicle
GS 8 (part no. 57014-01)
GS 10 (part no. 57024-01)
Gas filter
suitable for all wall-mounted gas pressure regulation systems
with a M 20 x 1.5 inlet screw joint (male thread – G.13). Instal-
lation upstream of the gas pressure regulation system.
(part no. 50602-01)
Angle bracket
for attaching the gas pressure regulation system to a stable
wall of the gas cylinder box in a horizontal position
(part no. 50020-18100)