Operation In "Spa" Mode Only (Automatic); Operation In "Cooling" Mode Only; Operation In "Dehumidification" Mode Only; Operation In "Ventilation" Mode Only - Olimpia splendid Unico twin Mode D'emploi Et D'entretien

6.4.2 -

OPERATION IN "SPA" MODE ONLY (AUTOMATIC)

• In this mode, the machine's temperature is automatically regulated according to the room's temperature.
The fan speed is also automatically regulated according to the set temperature (except in dehumidification
mode).
• To activate this mode, press several times key B5 on the remote control until when symbol D5 appears
on the display.
in this mode, the appliance automatically sets the mode of operation (cooling, ventilation or heating, if
applicable), the system temperature and ventilation speed.
6.4.3 -

OPERATION IN "COOLING" MODE ONLY

• When used in this mode, the air conditioner dehumidifies and cools the room.
• To activate this mode, press several times the key B5 on the remote control until when the symbol D2
appears on its display.
• In this run mode, the required temperature and fan speed can be set.
after three minutes (maximum time) from the activation of this mode of operation, the appliance starts
supplying cold air .
6.4.4 -

OPERATION IN "DEHUMIDIFICATION" MODE ONLY

• When used in this mode, the air conditioner eliminates the humidity in the room.
this function can be extremely useful between seasons, particularly on rainy days when the temperature
is not uncomfortable but the excess humidity feels unpleasant.
• In this mode, both room temperature and fan speed settings are ignored, which correspond to minimum.
• Any fan temperature and speed indication then disappears from the display (LED6) of the control panel
(fig.F).
• Press several times key B5 on the remote until when symbol D3 and the symbol of minimum ventilation
D18 appear on its display to activate this mode.
• In this operating mode it is normal for the air conditioner to function intermittently.
6.4.5 -

OPERATION IN "VENTILATION" MODE ONLY

• When used in this mode the air conditioner does not perform any action with regard to temperature and
air humidity in the room.
• Press several times key B5 on the remote until when the symbol of minimum ventilation D18 appears on
its display to activate this mode.
in this mode it is possible to select the maximum, medium and minimum speed of the fan.
6.4.6 -

OPERATION IN "HEATING" MODE ONLY

• Using this mode, the appliance heats the room.
• To activate this mode, press several times key B5 on the remote control until when symbol D1 appears
on its display.
• In this run mode, the required temperature and fan speed can be set. after three minutes (maximum time)
from the activation of this mode of operation, the appliance starts supplying heat.
EN - 38