Night Well-Being Key; Timer Setting; Setting The Correct Time - Olimpia splendid Unico twin Mode D'emploi Et D'entretien

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

If both units are in operation, UNICO MASTER and WAL ventilation is limited to low speed.

5.4.9 - NIGHT WELL-BEING KEY

Press the T3 button (night well-being) to obtain several results, specifically:
• Gradual increase of the set cooling temperature.
• Gradual decrease of the temperature set for heating (only HP models).

5.5 - Timer setting

• The appliance logic allows the User to make use of two different timer programs (see paragraph 5.5.2),
thanks to which the appliance can be deactivated and activated (or vice versa) whenever desired (for
example, it can be activated shortly before returning home so as to find an already pleasant temperature
in the room).
• Firstly, if it is desired to make use of these functions, set the correct time (see paragraph 5.5.1) and then
set the timer as you prefer.

5.5.1 - SETTING THE CORRECT TIME

Work with the remote control as follows in order to set time:
a.
Press key T6 until when the indication of the hours h
(U10) appears on the display.
b. increase or decrease the hours indication by means of
the tilt selector T7.
c.
Press key T6 until when the indication of the minutes m
(U10) appears on the display.
d. increase or decrease the minutes indication by means
of the tilt selector T7.
e.
Press key T6 to save the set time.
5.5.2 - TIMER SETTING
(PROGR. 1 AND PROGR. 2)
it is possible to set one or both the timer programs.
to set the appliance activation and deactivation times in the
two programs, use the remote control and work as follows:
a.
Press key T6 once or more until when the symbol 1 (U8)
appears on the display (Switch-on time of the 1° program).
b. increase or decrease the time at which you desire the
air conditioner activates by means of the tilt selector T7.
the variation of the settable time with selector T7 is of
30 minutes.
c.
Press key T6 a second time; the symbol 1 (U8-UX) appears
on the display (Switch-off time of the 1° program).
EN - 28
U10
U8
UX
U9 UY

Publicité

Table des Matières
loading

Table des Matières