Procedure For Cleaning And Lubricating The Front Derailleur - CAMPAGNOLO POTENZA 11 Manuel D'utilisation

Masquer les pouces Voir aussi pour POTENZA 11:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 70
WARNING!
Salty environments (such as winter roads or roads near the sea) may lead to galvanic
corrosion of most of the bicycle's exposed components. To prevent damage, malfun-
ctions and accidents, rinse, dry and carefully re-lubricate all components which are
subject to this phenomenon.

7.1 - PROCEDURE FOR CLEANING AND LUBRICATING THE FRONT DERAILLEUR

• Before lubricating, carefully clean the drivetrain (system, sprocket pack, chainrings
and rear derailleur wheels) with a brush or cloth soaked in a specific degreaser/deter-
gent. In the case of dust or mud, remove any residuals with specific plastic tools.
• Dry the drivetrain with a soft cloth: never use abrasive sponges or metal scouring
pads.
• Carefully lubricate the components, using a specific chain lubricant.
• After application, turn the hand cranks using all the possible gear combinations in
order to properly lubricate the entire drivetrain.
• Carefully clean any remaining lubricant remaining on the bicycle or the floor.
WARNING!
Lubricant residues on the rims, brake shoes, discs and brake pads can decrease or
nullify your bicycle's braking capacity, and can lead to accidents, physical injuries, or
even death.
ENGLISH
45

Publicité

Table des Matières
loading

Table des Matières