Periodic Maintenance - CAMPAGNOLO ZONDA Manuel De L'utilisateur

6 - PERIODIC MAINTENANCE

ATTENTION! NOTE FOR SPECIALIZED MECHANICS
CONTACT YOUR CAMPAGNOLO
®
HUBS, OR YOUR CAMPAGNOLO DEALER.
PROCEDURE: We recommend that you contact a specialized mechanic for all the assembly, disassembly and all hub, rim
and spoke replacement operations. Choose with him the most suitable interval of inspections for you on the basis of the
conditions of use and intensity of your activities (e.g. racing, rain, salted roads, muddy roads, cyclist's weight, etc.).
Check by a qualified mechanic:
• check the lubrication, rolling and clearance of the hubs / check the wheel centering
Check by a qualified mechanic:
check lubrication, rolling resistance and hub play and replace worn hub and freewheel body components if necessary /
•
check the wheel centering
• If the hub bearings are CULT ones, regularly take the bicycle to a qualified mechanic to lubricate the hub bearings and ball bearings with special bearing oil.
• If the hub bearings are USB or Standard ones, regularly take the bicycle to a qualified mechanic to lubricate the hub bearings and ball bearings with special
bearing grease.
• Never make any modifications to any Campagnolo product.
• Make sure there are no damaged or loose spokes.
• Any parts that are bent or damaged as the result of impact or an accident must be replaced with original Campagnolo parts.
• If the bicycle is used in the wet, remember that the braking power and tyre grip decrease significantly, making it more difficult to control. Therefore pay more
attention when riding on wet surfaces to avoid accidents which may result in injury or even death.
• Do not expose the products to high temperatures, do not leave them closed in cars parked in the sun, do not store them near radiators or other heat sources,
do not store carbon or plastic products in direct sunlight.
SERVICE CENTER FOR THE INSTRUCTIONS FOR ASSEMBLING, MAINTAINING AND REPLACING RIMS, SPOKES AND
MILEAGE IN Km (MAX)
2.000
10.000
9