CAMPAGNOLO ZONDA Manuel De L'utilisateur page 18

5 - BRAKES
WARNING!
Choose the version that is suitable for the type of brakes used. Do not use conventional brakes on a wheel with disc brakes and vice versa. The
wrong combination may cause accidents, injuries or even death.
Note: For instructions on brake use and maintenance, refer to the Instruction Sheet provided by the brake manufacturer.
5.1 – ASSEMBLY OF THE ROTOR WITH THE AXIAL FIXING SYSTEM™ (depending on the version, if applicable)
• Fit the rotor into its seat, taking care with the direction of rotation indicated by the arrow
(Fig. 3).
• Fit the washer (A - Fig. 3) and screw the provided lockring (B – Fig. 3).
• Tighten the lockring to 40 Nm (354 in.lbs) using the tool UT-BB130 (C - Fig. 3 - not
provided) and torque wrench (D - Fig. 3).
A B C
A
35 N.m 40 Nm
(354 in.lbs)
3
D
B C D
7