SWM OUTLAW 2018 Manuel D'utilisation Et D'entretien page 71

DIRECTION INDICATOR LIGHTS "
The light ashes when activating the left- or right-
hand turning indicator using the control lever on the
left-hand switch.
HIGH-BEAM LIGHT
The light comes on when activating the high-beam
light using the control on the left-hand switch.
NEUTRAL WARNING LIGHT
The light comes on when the gear shift lever is in
neutral position (no gear engaged).
ENGINE FAILURE WARNING LIGHT
When the ignition key is turned, the engine control
unit runs a self-test, the light comes on for a few
seconds and then goes o if no fault is found.
If the light comes on while the engine is running, it
means that there is an engine or injection system
failure.
- Stop and turn o the engine.
- Wait a few minutes and restart the engine; if the
light comes on again, contact your nearest SWM
dealer to have the self-test system checked.
" FUEL RESERVE WARNING LIGHT
When the ignition key is turned, the light comes on
for a few seconds and then goes o .
If the light comes on while riding the motorcycle, it
means that the fuel has gone into reserve ( 3 litres)
and you need to refuel as soon as possible.
ABS SYSTEM FAULT WARNING LIGHT "
When the key is turned, the ABS control unit runs a
self-test, the light comes on for a few seconds and
then goes o indicating there is no fault.
If instead the light comes on while the motorbike
is running, it means that there is a fault of the ABS
braking system:
- Stop and turn o the engine.
- wait for a few minutes and restart the engine.
If the light turns on again, see the closest SWM
dealer to check the ABS system.
MULTIFUNCTION DISPLAY
1) Speedometer
Indicates motorcycle speed.
2) Speed scale indication:
km/h = kilometres/hour
mph = miles/hour
3) Display parameters
The following parameters that will be displayed in
the eld (4) can be individually set in this eld.
CLOCK = Clock (See Clock settings)
ODO = Odometer (read-only value)
TRIP = Partial odometer (see TRIP settings)
5) Unit of measurement
"
ABS
Mile = indicates that the valued indicated in the
ODO and TRIP functions is in miles
Km = indicates that the valued indicated in the
ODO and TRIP functions is in kilometres
1
3
4
2
5
EN - 13