Operation; Searching - Albrecht AE75H Mode D'emploi

T L/O
L/O
3
P
888
PRI
888.888
25, 33, 50, 66, 75

Operation

SEARCHING

The AE75H has 10 preset search ranges that display as 1 - 10 across
the top of the screen when you press Srch. It also has 7 preset service
bands that display in two rows across the bottom of the screen when you
press Func + Svc.
Note: Service Search is discussed on page 63
When you press Srch, the AE75H begins searching the search ranges
until it finds activity. The search range number flashes and it remains on
that frequency until activity ends. Press Srch at any time to continue.
Press a search range's corresponding number to turn it off and back on.
For example, press 4 to turn search range #4 off. The number 4 will no
longer display across the top of the screen.
You can search these ranges through:
Displays and blinks when the
battery power gets low.
Displays when the rechargeable
batteries are charging.
Indicates a locked out frequency.
T L/O: Temporary Lock Out
L/O: Lock Out
Displays when a Priority channel is
selected.
Current channel number.
Displays when the Priority feature is
active.
Current frequency.
These numbers indicate the 100 Hz and
10 Hz digits. For example, "25" is
indicated when you set the frequency to
446.00625 MHz.
English 61