Service Search; Storing Frequencies - Albrecht AE75H Mode D'emploi

4. Enter the upper limit frequency and press E. The adjusted
frequency range flashes with the adjusted upper limit frequency
(both upper and lower frequencies are now adjusted).
5. Press Srch to start searching your custom search range or turn
the scroll control knob to a different search range and enter
another frequency.

Service Search

You can search for Emergency, Freenet, PMR, Marine, Air, CB radio,
and HAM radio transmissions without knowing the specific frequencies
used in your area. The scanner is preprogrammed with all the
frequencies allocated to these services. To use this feature, press
Func+ Svc. SRCH appears and the scanner starts searching from the
Emergency service bands.
To select a different service search, repeatedly press Svc as long as you
are still in Function mode. If you are not in Function mode, press Func to
return and then press Svc.
Services are scanned in the following order: Emergency, Freenet, PMR,
Marine, Air, CB radio, and HAM radio. When the scanner stops on a
transmission, press Hold to stop searching and listen to the
transmission. Hold displays. In this mode, you can also turn the scroll
control knob to step through the frequencies.
To release the hold and continue searching, press Hold again.

Storing Frequencies

To store frequencies in the first available channel:
1. Press Hold.
2. Enter the frequency and press Func + Pgm.
3. The scanner alternates between the frequency you are stopped on
and the first available channel number with no frequency stored.
Press E.
English 63