Low Battery Alert - Albrecht AE75H Mode D'emploi

3. Connect the other end of the USB cable to the computer's USB
port or to an AC or DC adapter that provides USB charging power.
4. The scanner displays CHArg and the low battery icon while it
charges the batteries. The screen goes blank after the scanner is
completely charged.
Different status messages may display, depending on the battery type
and scanner status.
LCD Message Batt. Type
CHArg
None
None
Err CHArg
ILEgAL
If the batteries are good, the scanner charges the batteries and it
operates normally. If the scanner cannot immediately determine if the
batteries are good and can be charged, it checks them and displays the
battery icon. If the scanner judges the batteries are good, the scanner
starts charging and the battery icon disappears. If it cannot regard the
batteries as good in 60 seconds, the scanner stops checking and the
battery icon blinks.

Low Battery Alert

The Low Battery Alert tone sounds every 15 seconds and the battery
icon flashes when the battery voltage is low. If it drops below the
threshold, the scanner automatically shuts off until the battery is
recharged.
Ni-MH Scanner is charging.
Ni-MH Unit is charged.
Ni-MH Scanner is not charging
(Battery selection switch
is set to Alk.)
Ni-MH Batteries cannot be
charged (dead battery).
Ni-MH USB external power is
out of range.
English
Meaning Scanner Cond.
Off
Off
Off
Off
Off
55