Basic Radio Operation - Albrecht Tectalk Duro XS Mode D'emploi

1. Basic Radio Operation

The PMR-446 Radio service which this radio uses shares
channels on a ‚ take turns' basis. This means that other
users and groups may be using any channel and privacy
code combination. To communicate with other PMR446 radios,
all units must be switched to the same frequency and privacy
code.
If the combination you have chosen is already in use,
please make an alternative selection.
1. Switch on your radio.
2. Check and if necessary change the channel or
frequency and privacy code settings.
3. To speak, hold the radio upright, about 5 cm from your
mouth and press the PTT. Speak slowly and clearly
towards the radio.
Release the PTT when you fi nish speaking.
You will hear messages from other radios that are
within range and have the same channel and privacy
code setting.
English 35