Basic Radio Operation - Albrecht Tectalk Duro Mode D'emploi

Display

Basic Radio Operation

The PMR-446 or LPD Radio service which this radio uses shares
channels on a ' take turns' basis. This means that other users and
groups may be using any channel and privacy code combination. To
communicate with other radios, all units must be switched to the same
frequency and privacy code.
If the combination you have chosen is already in use, please make an
alternative selection.
1. Switch on your radio.
2. Check and if necessary change the channel or frequency and
privacy code settings.
3. To speak, hold the radio upright, about 10 cm from your mouth and
press the PTT. Speak slowly and clearly towards the radio.
Release the PTT when you finish speaking.
34
Function
Squelch level Selection
Roger Beep On/Off
Key Tone On/Off
Call (Page) Tone
Selection
Bluetooth Compatible
On/Off
Dual Watch & Channel
Selection
BCLO (Busy Channel
Lock Out) Selection
English
Setting