Quick Search; Custom Search - Albrecht AE75H Mode D'emploi

Quick Search - Designate a starting point to search from.
Custom Search - Designate and store upper and lower frequency
limits for each of 10 search ranges. The scanner searches within
this range.

Quick Search

Quick Search lets you designate a starting point for searching. Once you
are searching from this point, you can stop the search and store
frequencies in a channel.
1. If the scanner is scanning or searching, press Hold.
2. Enter the frequency using the number and .Clr keys. The scanner
automatically rounds the entered number to the nearest valid
frequency. For example, if you enter 151.473 (MHz), your scanner
accepts it as 151.475. However, if you enter a frequency that is out
of range, the scanner sounds an error tone and Error appears.
Enter another frequency.
3. Press Srch. The scanner searches, starting from the frequency
you just entered. (Turn the scroll control knob to change the
search direction.) The scanner also automatically turns on the
Delay function; DLY displays. To turn off the function,
Press Func + Dly (see page 71).

Custom Search

You can adjust each preset search range's upper and lower frequency
limits.
1. Press Func + Psrc. The scanner enters Custom Search mode
and displays SRCH and PGM. The upper and lower frequencies
for Custom Search range 1 alternate.
2. Turn the scroll control knob to scroll through the rest of Custom
Search ranges until you find the one you want. The search range
numbers at the top of the screen change as you cycle through
them.
3. Enter the lower limit frequency and press E. The frequency range
flashes with the adjusted lower limit frequency.
62 English