Albrecht AE75H Mode D'emploi page 64

4. The scanner is now on that frequency, on Hold with the Delay
function automatically turned on (see page 71). Press L/O to exit
the program mode and return to the Search Hold mode.
You can also store frequencies directly into a specific channel in a
specific channel bank.
1. From Scan modes, press Func + Pgm. PGM appears
2. Turn the control knob to choose the memory.
3. Input the frequency and press E. The scanner is now on that
frequency, on Hold with the Delay function automatically turned
on.
5. Press L/O to exit program mode and return to Scanning mode.
If you entered a frequency that has already been entered elsewhere, the
scanner sounds an error tone and displays the channel that was
duplicated. If you entered the frequency by mistake, press Clr twice to
clear the frequency and enter a different one. To enter the frequency
anyway, press E to accept.
64 English