Program Pause; Open Lead - Chattanooga Cefar TENS Manuel D'utilisation

2 2 C e F A R t e n s e n
6 . 7 P r o gr am paus e
To pause a program press "P", both Channels 1 and 2 are paused, Amplitude goes down automatically
to 00,0. To resume program press "oK". Amplitude increases automatically and progressively to set value.
6 . 8 o pe n l e ad
The broken circuit display indicates on which channel that resistance is too high, or that a cable is
broken or detached. A high resistance can be caused by a bad connection between the electrodes
and your skin, or that the electrodes need to be replaced. The stimulation is stopped, while trouble
shooting is fixed.
note: Broken circuit is only indicated when running over 9.5mA. Arrow is pointing to the channel
with the open lead.