Chattanooga Cefar TENS Manuel D'utilisation page 238

2 3 8 C E F A R T E N S
Radiated RF
IEC 61000-4-3
Note 1 At 80 MHz and 800 MHz, the higher frequency range applies.
Note 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected
by absorption and reflection from structures, objects and people.
a Field strengths from fixed RF transmitters, such as base stations for radio (cellular/cordless)
telephones and land mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast
cannot be predicted theoretically with accuracy. To assess the electromagnetic environment due
to fixed RF transmitters, an electromagnetic site survey should be considered. If the measured
field strength in the location in which Cefar TENS is used exceeds the applicable RF compliance
level above, Cefar TENS should be observed to verify normal operation. If abnormal performance
is observed, additional measures may be necessary, such as re-orienting or relocating Cefar TENS.
b Over the frequency range 0.15 MHz to 80 MHz, field strengths should be less than 3 V/m.
10V/m
80 MHz to 2.7 10V/m
GHz