MORSO LIVING udeovn Mode D'emploi Et Manuel D'installation page 27

27
The stove may have pale markings on delivery. These are a result of assembly and handling
during production. marks will probably also arise when you assemble the stove. They can
easily be removed using cooking oil.
Assembling your Morsø Outdoor Oven
1. Place the plinth on a flat surface, preferably where you want
the stove to be.
remember to allow for the total diameter of 75 cm and separation from flammable
materials before positioning the stove.
2. Next, place the bottom on the plinth, with the opening in the
direction wanted.
3. Lay the center stone on the three legs in the middle of the
stove.
4. Place the rear stone so that it rests on the central stone, and
equally distributed over the two support points.
5. Now lay the last three side stones in place in the stove. Push
the side and rear stones together around the central stone.
6. Finally, add the top.
it is important to ensure that the top is not crooked, and that it
rests evenly on the whole of the lower part.