Setup User Consumables - Struers AbraPol-10 Mode D'emploi

Setup User Consumables

34
AbraPol-10
Instruction Manual
The menus User Lub./Susp. Configuration and User Surface
Configuration allow the user to add five suspensions, five
lubricants and eight grinding/polishing surfaces.
A name can contain up to 16 characters and a name should only
be used once.
When a lubricant or suspension has been named it is important to
configure the bottle(s) i.e. a bottle number must be allocated for
each lubricant and suspension name. For more information please
see Setup Bottle Configuration in the User Guide.
The tree pictures below show the three pop-ups shown when in
EDIT METOD STEP to choose a suspension/lubricant and a
surface.
The user defined names will always appear at the bottom of the
pop-ups and are not sorted in any way.
User defined consumables can be selected in all user methods.
If consumable names change this will have influence on all user methods
containing the consumable in question.
The following pages show how user consumables are created.
IMPORTANT