Using User Methods; Introduction; Method Groups - Struers TegraDoser-5 Mode D'emploi

Introduction

Method Groups

TegraDoser-5
Instruction Manual

4. Using User Methods

TegraDoser-5 software enables you to build a catalogue of user-
defined methods. These can be created either from scratch by
defining all the preparation parameters manually, or by copying
existing methods which can then be edited via the USER METHODS
menu.
To ease the task of managing the preparation methods, they can be
grouped together as Method Groups. All the preparation process
data available through the User Methods menu can be copied,
moved, edited, renamed and deleted.
User Methods that have common attributes, for example they are
used on the same class or type of materials, can be grouped
together. These are known as Method Groups and are accessed as
follows:
If the MAIN MENU is not currently displayed, press Esc

until the MAIN MENU appears.

Use the Arrow buttons



Press ENTER
menu.

The METHOD GROUPS menu can list up to 10 groups. These are
listed alphabetically and from within this menu, you can create new
groups, as well as rename and delete existing groups.
to select User Methods:


to activate the METHOD GROUPS
25