Software Settings - Struers AbraPol-10 Mode D'emploi

Software Settings

18
AbraPol-10
Instruction Manual
Switch on the power at the main switch located at the right hand
side of the machine. The following display will appear briefly:
The display will then change to the last screen shown before
AbraPol-10 was switched off, usually a preparation method. When
switching on AbraPol-10 for the first time, the MAIN MENU
display will appear. If the heading in the display is different,
press Esc, until the MAIN MENU appears.
The MAIN MENU is the highest level in the menu structure. Pre-
defined Struers methods, your own methods, manual functions or
the configuration menu can then be selected.
D
Turn knob to select CONFIGURATION.
D
Push knob to activate the
CONFIGURATION MENU.
D