Method Parameters; Surface; Disc Speed; Grit/Grain - Struers AbraPol-10 Mode D'emploi

Method Parameters

Surface

Disc speed

Grit/grain

Lubricant

48
AbraPol-10
Instruction Manual
For every method step a series of parameters can be changed:
Pushing the knob allows you to select between all the surfaces in
the AbraPol-10 database:
The speed can be set to 150 or 300 rpm.
Pushing the knob allows you to select between the different grain
sizes available:
Pushing the knob allows you to select between the different
lubricants available: