EMS AIRFLOW Prophylaxis Master Mode D'emploi page 68

®
PIEZON power setting
The unit is equipped with NO PAIN
according to the load applied to the instrument.
The following table shows the maximum output power as per user power setting:
®
PIEZON
Power
Risk of tip breakage: with ENDO
AIRFLOW ® pressure setting
Both the PLUS and CLASSIC powder chambers have an integrated dynamic pressure regulator
that automatically set the optimal pressure range for the selected powder chamber and related
powder type as detailed in chapter "Powder Chambers".
The following table shows the static and approximate dynamic pressures
chamber and user power setting:
®
AIRFLOW
Pressure
5 Dynamic pressures depend on handpiece and powder type too. The listed pressures are for information
purpose and referring to the commonly used EL-308 AIRFLOW
powders.
ENGLISH
® technology which provides an adaptive response in function
Power Setting Power Setting 0 0 0 0
Power Power Setting Setting
Max Output Power [W] 0
ENDO files ENDO ENDO files, do not exceed 2.5W (power setting "3" max files files
Pressure Setting Pressure Pressure Pressure Setting Setting Setting 0 0 0 0
Static [Bar] /
CLASSIC dynamic [Bar] /
PLUS dynamic [Bar] /
FB-618/EN – Rev. A-01 - 2017.03.30
1 1 1 1 2 2 2 2 3 3 3 3 4 4 4 4 5 5 5 5
0.4 1.2 2.1 3.0 3.9
power setting "3" max power setting "3" max power setting "3" max. . . . )
1 1 1 1 2 2 2 2 3 3 3 3 4 4 4 4
2.5 2.7 3.0 3.2
1.9 2.1 2.3 2.6
1.5 1.7 1.9 2.0
® handpiece with DV-082 and DV-048
6 6 6 6 7 7 7 7 8 8 8 8 9 9 9 9
4.8 5.6 6.4 7.2
5 as per selected powder
5 5 5 5 6 6 6 6 7 7 7 7 8 8 8 8
3.5 3.7 4.0 4.2
2.8 3.0 3.2 3.5
2.2 2.4 2.6 2.7
10 10
10 10
8.0
9 9 9 9 10 10 10 10
4.5 4.7
3.7 3.9
2.9 3.1
18/46