Water Supply And Piezon - EMS AIRFLOW Prophylaxis Master Mode D'emploi

2.4. Water supply and PIEZON

Without B B B B ottle: Without ottle:
Without Without ottle: ottle:
® ®
PIEZON & AIRFLOW
1
The CLIP+CLEAN shall be
previously cleaned and disinfected
before use.
Non-disinfected CLIP+CLEAN may
contaminate the device.
Compatible disinfecting solutions for Compatible disinfecting solutions Compatible disinfecting solutions Compatible disinfecting solutions
Please refer to the standards applicable in your country regarding the purchase and use of these products.
Different solutions can be used during treatment. Chemical reactions might occur between these solutions and damage
the unit. Wash the liquid circuit with distilled (or demineralized) water before using a different solution.
Disinfectant solution Disinfectant solution Disinfectant solution Disinfectant solution
Sodium Hypochlorite
Chlorexidine
Carbanilides
Povidone iodine
Quaternary ammonium compound
Cetylpyridin chloride
Citric acid
Physiological water
Ethanol
Isopropanol
Do not sterilize the PIEZON
Use only ambient temperature active disinfectant and cleaning agents.
ENGLISH
use external water supply.
Place the CLIP+CLEAN into the
device's bottle receptacle for dust
protection.
for PIEZON for for PIEZON PIEZON PIEZON
Concentration Concentration Concentration Concentration
®
bottle and its nozzle cap by steaming or dry thermal reprocessing.
FB-618/EN – Rev. A-01 - 2017.03.30
®
bottle
2
® ® ® ® bottle: : : : bottle bottle bottle
≤ 5%
≤ 1%
≤0.05%
≤12%
≤0.7%
≤1%
≤5%
≤0.9%
90%
90%
With B B B B ottle With ottle connected connected: : : :
With With ottle ottle connected connected
®
AIRFLOW uses external water supply.
PIEZON ® uses bottle liquid supply.
Connect the PIEZON
Only use the PIEZON
(transparent) for disinfectant solutions.
® bottle
® bottle EG-111
14/46