The Rower Computer; Basic Functions - Skandika Fitness NEMO Mode D'emploi / Instructions De Montage

THE ROWER COMPUTER

Instructions for use
Install the batteries and the LCD panel will switch on and a sound will be emitted.
Mode: Allows access to various settings.
Enter: Press this button to set target values. The respective figure will flash. Press "Set"-button to
adjust the values.
Set: Press this button when figures are flashing to adjust target values. You may preset all function
values, except "Total Count" and "SPM". Once values are set, press "Enter" to quit setting mode.
Reset: Press this key to reset all values. Note: "Total Count" can only be reset by taking out and rein-
stalling the batteries.
Once target values are set, the computer will scroll through the various values every six seconds in
sequence. You may select a value for displaying by pressing the "Mode" button. Target values (e.g.
time) will countdown from the set value to zero. If 0 is reached, an alarm sound will be emitted. Press
any key to stop the alarm.
The Computer will enter sleep mode if not used for over 4 minutes and 30 seconds.
28

Basic functions

1. Time: Exercise time (0:00-99:59 min)
2. Count: Working range from 0-9999
3. SPM: Strokes per minute (15-3000).
4. Calories: Burned calories (0-9999)
5. Total Count: Working range from 0-9999
6. Tempo: Acoustical frequency support (0-180 beeps
per minute).