The Remote Control - Skandika Fitness SF-1091 Instructions De Montage

USE

The remote control

Power switch. Switches the
power supply on or off.
Speed +
Increases the speed
(level 1-20)
The exercise time is preset
to 10 minutes and may be in-
creased in steps of 1 minute.
Quick selection button
Quickly select speed
levels 16 / 10 / 6
The remote control features a
maximum signal range of 2.5
metres.
All functions of the Home Vibration Plate 600 may be set on the main device or with the help of the
remote control.
The programmes P1 to P3 are changing the vibration speed automatically and therefore provide a
diversified exercise.
In manual mode „88", the vibration speed needs to be adjusted manually (1-20).
Always point the remote control towards the infrared receiver when pressing any button.
If a constant mailfunction of the remote control appears, check the battery and change the battery if
necessary.
22
On / Off
Time+
Start / Stop
Starts or stops the motor when
power on.
Time-
The exercise time is preset to
10 minutes and may be decrea-
sed in steps of 1 minute.
Speed-
Decreases the speed
(level 1-20)
Automatic / programme mode
The manual mode is preset.
Multiple presses of this button
switches to the programmes
„P1", „P2" and „P3" or the ma-
nual mode „88"