How To Use The Control Panel - Hendi 225523 Mode D'emploi

8. HOW TO USE THE CONTROL PANEL

Fig. 3
Programmer indicator light
Temperature indicator light
Humidifier indicator light
Programming cooking time
To run the oven, turn the programmer knob (Fig.
3) in line with symbol
in line with the selected cooking time (up to 120
minutes). In the second case, end of cooking is sig-
nalled by the oven switching OFF automatically.
Programming cooking temperature
Turn the knob of the adjustment thermostat (Fig. 4)
in line with the temperature selected for cooking.
Programming vapour quantity
To generate vapour while the oven is in operation
(cooking compartment hot), turn the knob of the
automatic humidifi er (Fig. 5) in line with the re-
quired value (from 1 to 5). If you turn the knob to
position • (OFF) the humidifi er will stop operating.
Control thermostat indicator light
The control thermostat orange indicator light goes
OFF whenever the programmed temperature is
reached inside the cooking compartment. It lights up
(continuous operation) or
Fig. 4
again when the thermostat is tripped to re-estab-
lish this temperature.
Automatic humidifier indicator light
The orange indicator light of the automatic humid-
ifi er indicates that the water solenoid-valve is op-
erating and, therefore, vapour is being produced in
the cooking compartment.
"End of cooking" programmer indicator light
The programmer green indicator light indicate that
the oven is operating and that cooking time is active.
Oven internal light
The light is always on when the oven is operating.
To switch off the oven
Turn OFF the knobs of the "end of cooking" pro-
grammer and of the thermostat. When you have
fi nished using the oven, shut off the water ON/OFF
tap upstream of the appliance and cut out electric
power.
Fig. 5
11
EN