Fitting, Removing High-Pressure Hose - Stihl RE 271 Notice D'emploi

English
Fitting, removing high-
pressure hose
Machine without hose reel
Connecting the high-pressure hose
1
2
Push high-pressure hose onto the
N
connector (1)
Attach union nut (2) and screw it on
N
and tighten by hand
Disconnecting the high-pressure hose
Unscrew the union nut (2)
N
Pull high-pressure hose off of
N
connector (1)
Machine with hose reel
The high-pressure hose is already
connected.
40
Disconnecting the high-pressure hose
4
Unroll the high-pressure hose (4)
N
Pull out the spring clip (3) and pull
N
the high-pressure hose (4) out of
the connector
Connecting the high-pressure hose
Push the high-pressure hose (4)
N
onto the connector of the hose reel
Push the spring clip (3) down into
N
the connector
Connect the high-pressure to the
spray gun
2
3
1
Push the high-pressure hose (1)
N
onto the connector (2)
Attach union nut (3) and screw it on
N
and tighten by hand
Removal
3
Push the coupling (4) in the
N
direction of the arrow and hold it
Loosen the union nut (3) and
N
unscrew it from the connector in the
direction of the arrow
High-pressure hose extension
As a rule, always use only one high-
pressure hose extension – see "Special
accessories"
RE 271, RE 271 PLUS, RE 281, RE 281 PLUS
4
3