Fitting, Removing Spray Lance; Fitting, Removing High-Pressure Hose - Stihl RE 232 Notice D'emploi

English
Carrying handle
The pressure washer can be carried
using the carrying handle.
Transporting the machine in and on
vehicles
Secure the pressure washer in
N
accordance with the regulations in
force in the country to prevent
tipping over and damage
Lay the pressure washer flat for
transport
Place the pressure washer on its
N
back for transport
Remove the detergent tank – see
N
"Fitting, removing detergent tank"
Empty the detergent tank or secure
N
it so that it cannot tip over
46

Fitting, removing spray lance

Remove protective cap from the
N
spray lance and save for later use
1
Pull back and hold the coupling (1)
N
Push the spray lance (2) into the
N
mount on the spray gun, or pull it out
to remove the spray gun,
respectively
Release the coupling (1)
N
Fitting, removing high-
pressure hose
Machine without hose reel
Connecting the high-pressure hose
1
2
2
Push high-pressure hose onto the
N
connector (1)
Fit and attach the union nut (2) and
N
tighten it by hand
Disconnecting the high-pressure hose
Unscrew the union nut (2)
N
Pull high-pressure hose off of
N
connector (1)
Machine with hose reel
The high-pressure hose is already
connected.
RE 232, RE 272 PLUS, RE 282 PLUS