Fitting, Removing High-Pressure Hose - Stihl RE 98 Notice D'emploi

English
Remove
Press the safety latch button (4) and
N
pull out the nozzle (3)
32
Fitting, removing high-
pressure hose
High-pressure hose on machine
Fit
2
1
Push high-pressure hose onto the
N
connector (2)
Attach union nut (1) and screw it on
N
and tighten by hand
Remove
Unscrew the union nut (1)
N
Pull high-pressure hose off of
N
connector (2)
Connecting the high-pressure hose
to the spray
Fit
4
5
3
Push the connector (3) of the high-
N
pressure hose into the mount on the
spray gun (4) until it engages
Remove
Actuate the spring button (5) and
N
pull the high-pressure hose out of
the mount on the spray gun
High-pressure hose extension
As a rule, always use only one high-
pressure hose extension – see "Special
accessories"
RE 98