Assembling The Unit; Fitting, Removing Spray Lance - Stihl RE 271 Notice D'emploi

Assembling the Unit

Various accessory parts must be
mounted on the machines before
starting for the first time.
1
Push the holder (1) down into the
N
support on the frame
2
Attach the connector (2) to the
N
water inlet by hand and tighten it
Push the detergent tank into the
N
opening and push the handle down
against the frame until it engages
RE 271, RE 271 PLUS, RE 281, RE 281 PLUS
Screw the cap with the intake hose
N
onto the detergent tank
Machines with hose reel
Engage crank handle in hose reel
N

Fitting, removing spray lance

1
Pull back and hold the coupling (1)
N
Push the spray lance (2) into the
N
mount on the spray gun, or pull it out
to remove the spray gun,
respectively
Release the coupling (1)
N
English
2
39