Pulling Out And Pushing In The Handle; Connecting And Removing The High-Pressure Hose - Stihl RE 110 Notice D'emploi

English
Nozzles and cleaning needle
1
2
3
► Open the cover (1).
► Insert the fan-jet nozzle (2) and rotary-jet nozzle (3).
► Insert the cleaning needle (4).
8.2

Pulling out and Pushing in the Handle

8.2.1 Pulling out the Handle
To pull out the handle:
1
► Press the release button (1) and pull out the handle (2).
► Release the release button (1) and pull out the handle (2)
until it audibly engages.
18
4
2
8.2.2 Pushing in the Handle
To push in the handle:
1
► Press the release button (1) and push in the handle (2).
► Release the release button (1) and push in handle (2) until
it audibly engages.
8.3 Connecting and Removing the High-Pressure
Hose
8.3.1 Connecting the High-Pressure Hose
WARNING
Before starting assembly, switch off the pressure washer,
disconnect the unit from the power supply and ensure all
pressure is released from the system to reduce the risk of
injury from unintended spraying.
To connect the high-pressure hose:
► Switch off the pressure washer, @ 10.2.
► Disconnect the pressure washer from the power supply.
► Shut off the water supply.
► Remove all sand and debris from the connections and
couplings.
8 Assembling the Pressure Washer
2
0458-620-8221-A