Safety; Introduction; Intended Use; Inappropriate Use - Mettler Toledo EasyClean 200e Instructions D'utilisation

10

2 Safety

02/2021 © METTLER TOLEDO
Printed in Switzerland

2.1 Introduction

This instruction manual lists the main points of how to use the EasyClean 200e efficiently,
in the intended manner. For safe, trouble-free operation, operators must be aware of these safety
instructions and comply with further warning notices in the instruction manual.
This instruction manual, and the safety requirements in particular, must be observed by the
operator and all other persons working with the EasyClean 200e. Compliance with local
regulations and statutory requirements is also essential.
The instruction manual must always be stored close at hand, in a place accessible to all
people working with the EasyClean 200e.

2.2 Intended use

EasyClean 200e is intended solely for automatically controlled or manual flushing and cleaning
of sensors in retractable housings, as described in this instruction manual.
Other prerequisites for appropriate use include:
– observing the instructions, notes and requirements set out in this instruction manual
– observing the prescribed inspection and maintenance intervals
– correct care and maintenance of the unit, according to the instruction manual
– observing the prescribed environmental and operational conditions, and permitted
installation positions
– compliance with local statutes.

2.3 Inappropriate use

Any other use, or use not mentioned here, that is incompatible with the technical specifications
is deemed inappropriate. The operator is solely responsible for any damage arising from such
use.
The following are deemed particularly inappropriate:
– use of hydraulic fluid in place of compressed air
– use of suspensions as cleaning media
– use of salt acid of > 10%.
EasyClean 200e
EasyClean 200e
30 404 676 F