Data And Key Characteristics Easyclean 200E - Mettler Toledo EasyClean 200e Instructions D'utilisation

8
02/2021 © METTLER TOLEDO
Printed in Switzerland

1.3 Data and key characteristics EasyClean 200e

Enclosure
Weight
Protection rating
Ambient conditions
Power supply
System control
Control input
Transmitter
Electrical connections
Connection to valve unit
Connection transmitter
Cable ducts
Compressed air supply
Stainless steel enclosure, powder-coated with polyester resin
Attention: housing may not be cleaned with solvents
containing acetone
Control unit approx. 3.0 kg (6.6 lb)
Valve unit approx. 2.5 kg (5.5 lb)
IP65
Temp. in operation:
Temp. storage/transportation: –10...+70°C (+14...+158°F)
100...230V AC, 50/60 Hz, 0.18...0.3 A (± 15%)
Process initiation:
via a wash contact in the associated transmitter
Sequence:
controlled by the integrated programable PLC
1 control input for wash contact in transmitter 24V
METTLER TOLEDO transmitters:
– M300 Process
– M400 4-wire
– Alternatively via any standard transmitter with wash
contact and "HOLD" function
Terminal strip 0.08...2.5 mm
10-wire control cable, 1.5 mm
Length: 1.5 m
4-wire control cable, 4 1.5 mm
3
Length: 5 m
∆ 3.5...10 mm Æ M16
∆ 2.5...6.5 mm Æ M12
4...8 bar (400...800 kPa, 58...116 psi)
– Air quality according to ISO 8573-1
– Moisture class 4 (water dew point +3°C)
– Particles class 5 (filter 40 µm)
– Max. oil content class 2 (0.1 mg/m
1
Connection: thread G / "
8
EasyClean 200e
0...+55°C (+32...+131°F)
2
2
2
)
3
EasyClean 200e
30 404 676 F