Safety; Introduction; Declaration Of Conformity / Type Examinations - Mettler Toledo InFlow 76X Instructions D'utilisation

InFlow 76X

2 Safety

InFlow 76X
52 403 711
2.1

Introduction

The instruction manual contains the most important information for using the flow-through
housings InFlow 76X efficiently and in accordance with regulations. A basic condition for
safe handling and operation without malfunctions is the knowledge of these safety instructions
and the observance of the further warnings in the instruction manual.
This instruction manual, and in particular the safety regulations, are intended for personnel
entrusted with the operation and maintenance of the flow-through housings. It is assumed that
these persons are familiar with the equipment in which the flow-through housing is installed.
Therefore, before any work is started with the flow-through housing, this instruction manual
must be read and understood by those persons involved.
The instruction manual must be stored where it is constantly accessible and available to any
person working with the flow-through housing InFlow 76X.
On receipt of the shipment, check immediately:
– the flow-through housing and accessories for any sign of transport damage. Report any
damage immediately to the carrier and to your supplier
– the type designation on the flow-through housing body
– for completeness of the supply.
Please notify your supplier immediately if the shipment is incomplete or in any way incorrect
(see Section 3.1 "Scope of delivery").
2.2

Declaration of conformity / type examinations

NOTICE
The "Declarations of Conformity and Type Examinations" are dependent on the design and
the individual type of the flow-through housing, and have no general validity for the complete
InFlow product range.
© 04/17 Mettler-Toledo GmbH, CH-8606 Greifensee
9
Printed in Switzerland