Fastening The Seat Belt - Breezy Ibis Notice D'utilisation

Ibis
The system requires tie-down rails to be
mounted in the car. The chair must then always
be strapped to the four tie-down points.
Warning!
Transfer to a regular car seat if possible
that the vehicle is suitably designed, insured
and equipped for transporting a person in a
wheelchair.
Set the wheelchair in the standard position
and use the headrest if the wheelchair is
A chair with electrical power assist must
always be switched off when being
transported.

6.3 Fastening the seat belt

Warning!
Use the three-point seat belt in order to
reduce the risk of head and chest injuries in
the event of sudden braking or a collision.
Care should be taken when applying the
occupant restraint.
Use the seat belt as follows:
• Position the belt across the hips as tightly
as possible at an angle between 30° and
75°. Within these limits a steeper angle
is desirable. The other part of the belt
is positioned to sit across the chest and
•
and must not be twisted.
• Ensure that the seat belt is not obstructed
from having contact with the body by
wheelchair parts, such as armrests or
In order to prevent injury in the event of a
collision, secure wheelchair accessories to the
wheelchair or remove them from the chair and
secure them in the vehicle.
Transport 41
26
27