Settings (By A Professional) - Breezy Ibis Notice D'utilisation

Ibis
5 Settings (by a
professional)
Caution!
The seat tilt range can vary depending on the
way the wheelchair is adjusted.
Seat height
Before adjusting the seat height, remove as
many heavy seat parts as possible (seat,
backrest, etc.) to limit the weight to be lifted.
1. Loosen the 4 bolts (A) using a 13 mm
spanner, and remove them.
2. Lift the seat post off the bracket (B) and
place it back in the desired position on the
bracket.
3. Tighten the bolts (A) securely.
Seat angle
1. Tilt the seat with the seat tilt adjustment, so
that the adjusting plate becomes free.
2. Loosen the bolt (A) with a 4 mm Allen key,
and remove it.
3. Loosen the bolt (B) a few turns.
4. Turn the plate © in the desired position
(angle).
5. Tighten both bolts (A and B) securely.
Frame width (20"/22"/24")
1. Loosen the bolts (A) with a 13 mm spanner
and remove them.
2. Put the frame tube (B) in the desired
position, so that the holes are level with the
frame.
3. Tighten the bolts (A) securely.

Settings (by a professional)

37
13
14
15