Breezy Ibis Notice D'utilisation page 38

38 Settings (by a professional)
Position of the wheels
Warning!
Changing the position of the wheels may
affect the stability of the wheelchair. Check
the stability of the chair and make sure the
anti-tip brackets are well adjusted.
Check the brake.
12"/16" rear wheels
1. Put the frame on a solid base, so that the
wheels are off the ground.
2. Remove the manual control (A).
3. Remove the foot bracket (B).
4. Loosen the nut (C) with a 19mm spanner.
5. Move the wheel into the desired position.
6. Tighten the nut (C) securely.
20"/22"/24" rear wheels
1. Put the frame on a solid base, so that the
wheels are off the ground.
2. Loosen the bolts (A) with a 19 mm spanner
and remove them.
3. Move the wheel plate (B) into the desired
position.
4. Tighten the bolts (A) securely.
Ibis
16
17
18