Inspection Before Use; Getting In And Out - Breezy Ibis Notice D'utilisation

Ibis
Push handle height
1. Loosen (A) by one turn.
2. Slide (B) into the desired position.
3. Tighten (A).
Note!
The seat tilt adjustment cable should not be
too tight.

4.2 Inspection before use

you start using the wheelchair.

4.3 Getting in and out

Forward transfer
• Flipping up the central legrest footplate
• Flip up (A).
Warning!
Do not stand on the footplates. Putting
your full weight on the footplates may lead
to wheelchair damage and to hazardous
situations, including the wheelchair tipping
up.
Sideways transfer
• Folding back the armrest assembly
• Press (A) and fold (B) to the rear.
Warning!
Remove the tray before folding back the
armrest assembly.
Do not lean on the armrest when folded
back.
Note!
Some versions of the controller will need to
be swung aside.
Use 33
8
6
7