Struers Movipol-3 Mode D'emploi page 115

Case for RepliSet
The RepliSet Case is designed for trans-
por tation and use of the 50 ml RepliSet
system. It is made of alu minium and is at
the same time elegant and sturdy. It can
be carried as hand luggage on flights and
is compact and sturdy to such an extent,
that it can be taken to locations with nar-
row or difficult access.
The contents is either fixed by straps
in the lid or placed in compartments in
the two detachable foam rubber inserts.
Each item has its fixed position. The user
has access to all that is needed to per-
form a regular replication by just opening
the lid of the RepliSet Case. The lower
insert carries a small stock of consuma-
bles.
Transpol-2
Technical Data
Voltages
Speed
Dimensions (without shoulder bag)
Total weight incl. accessories
Specifications
Transpol-2, complete with soft cable, DC motor 230 or 120 V, straight handle,
right angle handle, flapper wheel, felt cone, 4 rubber discs
Rubber disc, 30 mm dia.
SiC grinding papers, adhesive, bundle of 100
Grit 60
Grit 120
Grit 240
Grit 500
DP cloths, adhesive, dia. 32 mm, bundle of 25
DP-Dur
DP-Dac
DP-Mol
DP-Nap
OP-Felt
Flapper wheel, 80 grit, 40 mm dia. x 10 mm
Movipol-3
Technical Data
Voltage supply to transformer
Voltage supply from transformer
Input fuse
Battery fuse
Thermal overload protection
Polishing power
Polishing area
Dimensions
Weight with batteries, but without electrolyte
Specifications
Movipol-3, complete with batteries and supply transformer, 220 V or 115 V
42 V charging/supply transformer for continuous use for Movipol 3, 230 V or 115 V
Set of extra batteries (9 pcs.)
Polishing Chambers for Movipol-3, Flexible type, 10 pcs.
PSM-2
Technical Data
Batteries 4 x 1.5 V, type LR20
Lamp (threaded base) 5 V, 6 W
Specifications
Portable microscope PSM-2, complete with 10 x eyepiece,
10 x objective, lamp housing and carrying case, without batteries
Objective, magnification 20 x
Objective, magnification 40 x
Measuring set consisting of measuring eye piece and plate micrometer
Transcopy
Transcopy Kit
Set consisting of 40 ml Transcopy Liquid, 50 replica foils 20 x 30 mm (0.8" x 1.2"), 1 pipette,
spray nozzle and 50 microscope slides 25 x 75 mm (1" x 3")
Transcopy Replica Foils, 50 pcs.
Transcopy Liquid, 40 ml
RepliSet
Technical Data
Resolution of cu red replica
Shrinkage
Tear Strength
Temperature range for the surface to be examined
Life span of the finished replicas is practically indefinite provided they are stored according to the instructions.
Content in static-mixing nozzle
Specifications
Replication system for non-destructive testing of a microstructure or a 3D structure. Fast curing
two-part silicon rubber compound for flexible high-resolution 3D replicas. For the 50 ml system,
the hand-operated dispensing gun (40900066) and the static mixing nozzles (40900088) are used in
combination with the 50 ml cartridges.
For the 265 ml system, the hand-operated dispensing gun (40900065) and the static-mixing
nozzles (40900056) are used in combination with the 265 ml cartridges
230 V, 50/60 Hz; 120 V, 50/60 Hz;
100-7000 rpm
Width 180 mm
Height 75 mm
Depth 150 mm
5 kg
220 V 50/60 Hz, 115V 50/60 Hz
42 V AC
5 A
10 A
Max. 140 VA
About 9 mm dia
Width 410 mm
Height 280 mm
Depth 200 mm
Net 8.80 kg
Length 210 mm (8.3")
Diameters 15-60 mm (0.6"-2.4")
Weight 600 g
Down to 0.1 micron
Negligible
15-20 kN/m
2
-10ºC to +180ºC
1.1 ml in nozzle for 50 ml cartridge
9.3 ml in nozzle for 265 ml cartridge
Cat. no.
059561xx
40800055
40400049
40400129
40400130
40400131
40500040
40500145
40500041
40500042
40500043
40800053
039265xx
044462xx
03926901
03926904
04286101
04286901
04286902
04286903
40900090
40900091
40900092