Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
7 Connect the display unit:
- Raise the display unit from below
by approximately 45°
- Plug in the 12V connector (display
unit power supply)
- Connect to ground
- Connect
the
ribbon
electronic board.
Take care to observe the ribbon
wiring direction, otherwise the
product may be damaged. Store
the cables inside the clock in
order to prevent cable pinching.
8 Fix the clock onto the bracket with the
2 or 3 lower area attachment screws
(according to model).
to
the
8
7
EN
7
Publicité
Table des Matières
