Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
7.4 Parameters
This page allows you to set the clock display on the network.
The information displayed is described below:
• Luminosity: Used to set clock brightness between 4 levels from 1 (low) to 4 (high). Default brightness is 3.
• Mode 12H/24H: Used to display the time in 12- hour or 24-hour mode.Example: 8:00 (in 12-hour mode) or
20:00 (in 24-hour mode).
• Eco Mode: Used to enable the clock's energy-saving mode. In Eco mode, the clock displays the flashing colon
and is set to minimum brightness (level 1). This mode is set for a period configured below (ON &
OFF Time). This mode is disabled if the user opens the configuration menu (using the "S" and "+"
keys) or changes the settings on the web server or if the clock is rebooted.
• ON & OFF Time: Used to define the period when Eco mode is enabled. This mode is only enabled when the
is used to save any settings made on this page.
status changes. Example: if Eco mode is set at 8:30 for 8:00 (day D), the clock switches to
this mode at 8:00 on the following day (D+1).
EN
15
Publicité
Table des Matières
