Possible Causes Of Residual Contamination - Miele professional TK/1 Mode D'emploi

en

Possible causes of residual contamination

Disposal
Product
Packaging
32
,
If there is clear evidence of residual contamination
(large amounts of protein), check the processing method.
Was a validated method used?
Were processing conditions met?
– Was a suitable, high-performance cleaning agent used,
– Were water quality, temperature, etc appropriate?
Was the machine correctly loaded and in proper working
order?
– Were baskets correctly loaded?
– Were instruments correctly connected to nozzles or
adapters?
– Were the spray arms impeded?
– Was the filter of the washer-disinfector clean etc.?
Were preconditions met?
– Has contact with antiseptics caused protein denaturation?
– Were instruments left to stand too long before being
processed?
– Has denaturation occurred because instruments were
treated in a disinfection bath before being processed?
– Was ultrasonic pre-treatment forgotten, etc.
Chemicals must be disposed of in compliance with the
respective national regulations. At www.retrologistik.de you
will find country- and substance-specific information as well
as useful contacts.
Merck product packaging must be disposed of in
compliance with the country-specific regulations or must be
passed to a packaging return system. At
www.retrologistik.de you will find specific information on
the respective national conditions as well as useful contacts.