Switching On And Main Video Page - Viscount Cantorum Duo Mode D'emploi

User Manual

3. SWITCHING ON AND MAIN VIDEO PAGE

After switching on the instrument, the display shows the introduction page,
then, the current version (Release) of the operating system,
the main video page appears in a few seconds,
On the top of this video page are the following parameters:
o TRANSPOSER: set the transposer.
o TUNING: fine tuning of the pitch, indicated as the frequency of A3 (an 8' pipe).
o TEMPER. (Temperament): selector for setting historical temperaments of various periods (for a
description of temperaments, see par. 10.2 and 10.3).
Here, as in all video pages, use the [FIELD
selected by the cursor, fields invert colour.
To set the value of a parameter, select it with the cursor, then press use [VALUE +] and [VALUE -].
Some parameters have a central range value (e.g. -6 / 0 / +6); to modify the central value, press
simultaneously the VALUE buttons. This will select the central value.
The display field MAIN MENU allows to access the main menu with all the organ configurations. To
enter the menu, place the cursor on this field and press [ENTER].
To return to the main video page from the MAIN MENU, press [EXIT].
In the lowest part of the video page there are 3 that indicate:
o BANK: the current memory bank, selected through the pistons [S] and [PREV] or [NEXT];
o CRESC.: the currently selected Crescendo step;
o MANUAL II: Manual II expression level;
] and [FIELD ] buttons to move the cursor. When
 
EN - 8