Technical Description; Permissible Use And Fuel; Accessories Supplied - Anselmo Cola TERMO LORENE ERMETICA Manuel D'installation, D'utilisation Et D'entretien

1.4 Technical description

The stove works exclusively on pellets, providing healthy and safe heat in the room. The stove's automatic control
systems guarantee optimum heat output and complete combustion; there are also safety systems to guarantee safe
operation for the stove parts and for the user.
When correctly installed, the unit works in any outside climatic conditions, and in any case in critical conditions
(strong wind, frost, etc.) the safety systems can cut in, shutting down the stove.
The stove model TERMO LORENE ERMETICA with nominal power of 18,1 kW ensures a maximum heatable
3
volume of 434 m , considering the coefficient of a building's energy requirements equal to 35 W/m3, and may vary
depending on the insulation, type and climatic zone which are important variables for the correct choice of unit.
For technical data, refer to the table on page 5. For pellet heating stove dimensions refer to fig.1.
TERMO LORENE ERMETICA pellet heating stove fire door – pellet hopper door opening - closing
To open the fire door, put
the handle provided and
turn anticlockwise

1.5 Permissible use and fuel

The pellet stoves work exclusively on pellets in different types of wood complying with Standard DIN plus 51731 or
EN ISO 17225-2 or Ö-Norm M 7135 or having the following characteristics:
Heat value
Density
Moisture
Diameter:
Ash percentage
Length:
Composition:
Packing
The pellet hopper is on righ side of the stove.The door opening is located in the top part and loading occurs
manually with the stove on or off, making sure not to overfill and operate in complete safety.
The use of pellets with characteristics different from those tested by the technician during first lighting involves a
new setting of the boiler pellet loading parameters; this operation is not covered by the warranty.
- Store the pellets in a dry place.
- For reasons of regular and efficient operation, pellets or other fuels cannot be manually loaded in the brazier
- Do not load non-conforming fuels in the hopper.
- Do not load foreign bodies such as containers, boxes, bags, metals, etc., in the hopper.
- The use of poor quality and non-conforming pellets damages and compromises stove operation, invalidating the
warranty with the exclusion of liability of the manufacturer.
- Do not place the pellet bag or any loads on the ceramic outer frame avoid its possible cracks and / or breaks;
Failures to follow such procedure will invalidate the warranty with the exclusion of liability by the manufacturer.

1.6 Accessories supplied

The supply includes:
- Electrical power cable;
- Installation, use and maintenance manual;
- Opening - closing key;
- Remote Control.
min. 4.8 kWh/kg (4180 kcal/kg)
680-720 kg/m3
max. 10% weight
6 +0.5 mm
max. 1.5% weight
min. 6 mm- max. 30 mm
100% untreated wood from the wood industry or post consumer without added binding
substances or bark, complying with current regulations
in bags made from environmentally friendly or biodegradable material or paper
To open the pellet hopper to
enter door
37 TERMO LORENE ERMETICA