Fill-Level Indicator - Numatic TTB 6055/100T Mode D'emploi

19
!
Always ensure that chemical manufacturer's safety guidelines are followed.
Only use chemicals recommended for use in auto scrubber-dryers.
!
Do not operate machine unless the Operator Manual has been read and fully understood.
The machine is now ready to be moved to the cleaning site.
Machine Set-Up
Note: always ensure that the waste-water tank is empty before lifting.
WHEN HANDLING AND MIXING CHEMICALS

Fill-level Indicator

The water level in the clean-water tank can be measured using the
scale on the left rear side of the machine (Fig.19).
The clean-water bottom tank holds 60 litres.
IMPORTANT
Before performing the cleaning operation, place out appropriate
warning signs and sweep or dust-mop the floor.
26
!
!