Numatic TTB 6055/100T Mode D'emploi page 20

!
CAREFULLY OPEN AND CHECK THE CONTENTS OF THE START UP PACK.
Contents:
1 x Operator Manual
1 x Battery charging lead
2 x Keys
2 x 50 amp fuses (1 x spare)
1 x Maxi fuse-puller
Lift top tank assembly to reveal battery compartment,
ensuring you use the handle grip provided (Fig.1).
Fit battery fuses (contained in start-up pack) into the
battery fuse holders as illustrated (Fig.2).
Note: Wear suitable gloves when inserting fuses.
Note: Ensure that no metal objects come into contact with battery terminals while the batteries are exposed.
3
6
Ensure the Emergency Stop button is released (Fig.3).
Insert the key, turn the main control on / off key to position '1' (Fig.4).
Ensure that the forward/reverse switch is set to forward position (Fig.5).
Select the slow speed setting (Fig.6).
Depress control handle with both hands and slowly drive machine off of the pallet (Fig.7),
this control panel has been designed with a built in variable speed control trigger.
When the machine is removed and in a safe position, turn key back to the '0' position (Fig.8).
Quick Set-Up Guide
PLEASE READ BEFORE COMMENCING ANY OPERATION.
AFTER THE REMOVAL OF ALL THE PACKAGING,
1
When inserting the first fuse you may notice a spark, this is normal.
Use handle grip when
raising or lowering the
top waste-tank.
4
7
20
2
5
8
!